Multi-Skilled Technician (S5 Weekends Nights)

*Essential Functions*: An individual must be able to successfully perform the essential functions of this position with or without a reasonable accommodation.
Assist other maintenance technicians in the repair and maintenance of equipment.
Communicate with (or to) individuals or groups verbally and/or in writing (e.
g.
customers, suppliers, associates).
Complete work orders, records, logs and other written or computer-based documents according to established procedures.
Troubleshoot and repair complex electrical/electronic problems with equipment, networks, logic controls, Programmable Logic Controllers (PLCs) and external Input/Output (I/O) devices where the repair is not immediately visible or obvious.
Operate material handling equipment, battery equipment, moving machinery, and other powered equipment.
Perform preventive maintenance and repairs on equipment (e.
g.
, lift trucks, pneumatic systems, material handling equipment, hydraulic equipment, dock equipment, banana room equipment, electronic and electrical equipment, etc.
) according to procedures.
Diagnose refrigeration and electrical problems using technical drawings (e.
g.
, blueprints, electronic/mechanical schematics) and diagnostic tools (e.
g.
multi-meter, laptop).
*Physical Activities:* The following physical activities are necessary to perform one or more essential functions of this position.
Enters and locates information on computer.
Moves up and down a ladder.
Moves up and down stairs.
Grasps, turns, and manipulates objects of varying size and weight, requiring fine motor skills and hand-eye coordination.
Visually verifies information, often in small print.
*Multi-Skilled Technician*: Reads information, often in small print.
Visually locates merchandise and other objects.
Visually inspects equipment.
Reaches overhead and below the knees, including bending, twisting, pulling, and stooping.
Moves, lifts, carries, and places merchandise and supplies weighing up to 50 pounds without assistance.
Apply sideways/upward/downward pressure to tighten and loosen hardware (for example, nuts, bolts).
Observe behavior of others (i.
e.
, associates, customers, suppliers).
Wear personal protective equipment (PPE) as required, which could include, but not be limited to fall protection, eye protection, hearing protection, respiratory protection, chemical protection and electrical protection such as protective footwear.
Operate motor vehicle or other large power equipment.
Write documents, reports, etc.
using a writing instrument (e.
g.
, pencil, pen) or computer.
Lift, push, pull, and carry tools, objects or equipment above shoulder level without assistance.
Differentiate sounds in order to inspect and maintain equipment, identify potential hazards, or recognize safety alarms.
Use crossovers to access opposite sides of conveyors.
Use approved equipment to step up and access freight and equipment in elevated areas.
Work Environment Working in the following environment is necessary to perform one or more of the essential functions of this position.
May work with substances that require special handling Works in areas requiring exposure to varying temperatures, extreme heat or cold, and/or wet, damp, or drafty conditions.
Moves over sloping, uneven, or slippery surfaces.
Works at heights.
Work in areas with high noise levels that may require hearing protection.
Work outdoors for extended periods of time.
Move through narrow, enclosed, or elevated spaces.
Work indoors for extended periods of time.
*Entry Requirements:* *Minimum Qualifications:* Coursework or certification in electronic technology and 2 years' experience in industrial maintenance specializing in electronic technology (including troubleshooting and repairing automated equipment) OR 3 years' experience in industrial maintenance specializing in electronic technology (including troubleshooting and repairing automated equipment) *Preferred Qualifications:* Associate's Degree in electronic technology AND 2 years' experience in industrial maintenance specializing in electronic technology (including troubleshooting and repairing automated equipment) Location: 9200 Alexander Road, Olive Branch, MS 38654 Location: 9200 Alexander Road, Olive Branch, MS 38654 Job Type: Full-time Pay: $28.
00 - $36.
00 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Employee discount * Health insurance * Paid time off * Vision insurance Application Question(s): * Are you familiar with the Ramsay maintenance assessment? Work Location: In person